visibell instructions
visibell jpeg download
visibell pdf download
home page about visibell visibell flipbook visibell download contact visibell faqs
visibell three visibell sd T Eye Mobile DVR with GPS Rapid Deployment CCTV visilight visitrack visitext visibell rdr other visibell
visibell logo
  visibell contacts and pa buttons
 

Visibell Personal Attack Buttons
Main Features
Ideal for domestic alarm installations
The range offers a choice
of finishes to complement the individual requirements:
• White
• Chrome
• Gold
Finger reset operation
(no key to lose)
Modern attractive design.
Can be latching or non latching
Efficient push button design
Specification
Personal Attack Button
• Dimensions - Height 85mm Width 55mm Depth 32mm
• Mode - Normally Closed (Open when pressed)
• Material - Body ABS Button Polycarbonate
• Indication Red - Reset Indicator
• Reed Switch - See below
• White Personal Attack Button (Code: Active 8 WH)
• Chrome plated Personal Attack Button (Code: Active 8 CH)
• Gold plated Personal Attack Button (Code: Active 8 GO)



Visibell Surface Mount Contacts
Main Features
Surface Mount
Ideal for domestic and commercial applications
Available in white or brown
Addressable ID Version with built in biscuit
End of Line Version with built in Resistor/s
High quality Reed switches
Fixing screws provided
Specification
Surface Mount Contacts
• Operating - Surface Contact Reed Hi Sensitivity mode - 6mm (magnet on far side)
• Distances - Surface Contact Reed Low sensitivity mode - 15mm (magnet on near side)
• Distances - Surface ID (hall effect, no reed fitted) - 8mm (magnet next to chip)
• Colours Available - White and Brown
• Dimensions - Height 60mm Width 80mm Depth 12mm
• Mode - Normally closed when in proximity of the magnet
• Material - ABS/High Impact Styrene
• Reed Spec - See below
• Standard 3 terminal surface contact with reed switch (Code: Surfcon)
• ID surface contact with ID biscuit fitted 1-30 (Code: Surfcon ID)
• EOL surface contact with end of line resistor built in (Code: Surfcon EOL)
• Double EOL with end of line resistors in series and parallel (Code: Surfcon DEOL)
(For EOL please state value/s)



Visibell Flush Mount Contacts
Main Features
Flush Mount
Ideal for domestic and commercial applications
Available in white or brown
Addressable ID Version with built in biscuit
End of Line Version with built in Resistor/s
High quality Reed switches
Fixing screws provided
Specification
Flush Mount Contacts
• Operating - Flush Contact Reed 15mm
• Distances - Flush Contact ID (hall effect, no reed fitted) 8mm
• Colours Available - White and Brown
• Dimensions - Height 36mm Width 22mm Depth 15mm. Hole size 20mm
• Mode - Normally closed when in proximity of the magnet
• Material - ABS/High Impact Styrene
• Reed Spec - See below
• Standard Flush contact with simple reed switch (Code: Flushcon)
• Available ID surface contact with ID biscuit fitted 1-30 (Code: Flushcon ID)
• EOL surface contact with end of line resistor built in (Code: Flushcon EOL)
• Double EOL with end of line resistors in series and parallel (Code: Flushcon DEOL)
(For EOL please state value/s)

Reed Switch Specification
Flush Mount Contacts
• Contact Arrangement - Form A (SPST) Normally Open
(closed when in proximity of magnet)
• Contact Material - Rhodium
• Maximum Voltage - 100v DC 125v AC
• Maximum Current - 0.5A (non inductive)
• Breakdown Voltage - 200v DC
• Power Rating - 10VA
• Contact Resistance - 150 Milliohms
• Contact Capacitance - 0.3pf
• Insulation Resistance - 1012 ohms